Refrigerated Cold Food Drop In Unit RM-2 Pan Size
Cold Food Drop-In Unit, refrigerated, 3" recessed top, 2-pan size, self-contained refrigeration, insulated pan, stainless steel inner liner & top, galvanized steel outer liner, with on/off thermostat switch and pilot light, NSF-7 – 120v/60/1-ph, 1/4 hp, 6.0 amps, NEMA 5-15P, std.
2 Pans – Sale Price $1975
3 Pans – Sale Price $2195
4 Pans – Sale Price $2395
5 Pans – Sale Price $2650
6 Pans – Sale Price $2895
7 Pans – Sale Price -Call
8 Pans – Sale Price -Call
Refrigerated, with Side Coils
Self-Contained
The RM series refrigerated cold pan eliminates the mess and expense of ice in your cold food displays. In addition, this cold pan, 9" deep, has copper tubing wrapped around its side walls to meet the strictest health department codes. The drop-in pan can be installed in virtually any counter and can be provided as fully self-contained – just plug it in and turn it on – or remote, where there’s a need to locate the compressor at a different location.
Models: RM-1 RM-2 RM-3 RM-4 RM-5 RM-6
Cold Pan – RM Series
(3" Recessed top)
Refrigerated, with Side Coils
Self-Contained
Discription
The RM series refrigerated cold pan eliminates the mess and expense of ice in your cold food displays. In addition, this cold pan, 9" deep, has copper tubing wrapped around its side walls to meet the strictest health department codes. The drop-in pan can be installed in virtually any counter and can be provided as fully self-contained – just plug it in and turn it on – or remote, where there’s a need to locate the compressor at a different location.
The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain. The cold pan accommodates standard 12" x 20" pans, perfect for any cold food serving application.
- Refrigerated copper tubing, within the 3" recess, around all sides – meets your toughest health department standard
- Fully insulated for maximum efficiency and energy savings
- Factory applied gasket – makes installation a snap and seals units to the counter top, thus eliminating seepage
- Accommodates standard 12" X 20" pans with the use of separator channel(s) and pan rails, or fractional size pans with the use of optional adapter bar
- 1-Year Parts & Labor Warranty
- NSF Certified; UL Recognized
TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface, 3" down from the top, to hold the pan rails and a full set of removable separator channels in place.
LINER: The inner liner shall be 18 gauge, type 304 stainless steel with a 3" recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the top 3" on all sides. A 3/4 dia. drain with strainer, 4" PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.
REFRIGERATION SYSTEM: The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and digital electronic thermostat/thermometer. The system is fully charged with CFC free refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in the counter.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt,
single phase operation with an on/off switch and pilot light. A 6′ long, 3-wire cord and plug (NEMA 5-15P) will be provided.
*: Units with these accessories are not currently UL listed.
- 5YW – 5-Year Compressor Warranty
- WFB – Stainless steel perforated false bottom
- Stainless Steel adapter bars (pg DI-51-52)
- Stainless Steel adapter plates (pg DI-51-52)
- CP – Cover Plate with handles, S/S
- 2060-1 – Condensate Evaporator
- RS – Remote on/off switch for counter mounting
- RDVE – Rear Drain Valve Extension
- * 220 Volt – 50 Cycle Compressor
Spec Sheets – http://www.atlasfoodserv.com/catalog/specs/1/RM_specs.pdf
ON THE GO?
Take It Anywhere
Reviews
There are no reviews yet.